Promise Technology VessRAID 1720i Скачать руководство пользователя страница 236

Страница: 236 / 354

VessRAID 1000i Series Product Manual

220

Creating

To create a disk array automatically:

Press the

button until the display says Array Configure.

Press the

button and the display says Auto Configure.

Press the

button again and the display says Are you sure?

Press the

button so the display says Yes.

Press the

button to input your answer.

Press the

button again to confirm.

The display shows the array, logical drive, and spare drive creation process.

Verifying

To verify the results of the automatic disk array creation:

From the default screen, press the

button until the display says

Logical Disk Management.

Press the

button and the display says 000.

Press the

button again to choose this logical drive.

From the default screen, press the

buttons to scroll through the

information for the logical drive.

Creating a Disk Array – Advanced

Creating a Disk Array

For more information on the choices below, see “Chapter 8: Technology
Background” on page 245.

To create a disk array:

Press the

button until the display says Array Configure.

Press the

button and the display says Auto Configure.

Press the

button until the display says Advanced Configure.

Press the

button and the display says Disk Array Create.

Press the

button again and the display says Physical Drive Select.

Press the

button again to display the available physical drives by

number.

Press the

button to move through the list. Press the

button to

choose a physical drive for your array.

Note that you cannot mix HDDs and SSDs in the same disk array.

Содержание VessRAID 1720i



































































































































































































































































































































































Результаты поиска

Содержание VessRAID 1720i

Отзывы:

Бренды по названию

Популярные бренды

Promise Technology VessRAID 1720i, Руководство по эксплуатации продукта

Результаты поиска

Содержание VessRAID 1720i

Отзывы:

Бренды по названию

Популярные бренды