Promise Technology VES0603 Скачать руководство пользователя страница 36

Страница: 36 / 108

Use these holes on the bottom for mounting

2.5” hard disk drives. Four screw holes on the

bottom of the drive will line up with four of the

holes on the carrier.

Bottom view of empty disk carrier

nstalling

2.5” d

isk

rive

tHe

arrier

The instructions below apply 2.5” hard disk drives installed in drive carriers intended for use with models Vess

A7600 and Vess A7800.

1. Remove a disk drive carrier.

2. Carefully lay the disk drive into the drive carrier at the front, so that the screw holes on the bottom of the

carrier line up correctly with the power and data connectors facing away from the carrier handle.

3. Insert the screws through the holes on the bottom of the drive carrier and into the bottom of the disk drive.

Install only the counter-sink screws supplied with the drive.

•

Install four screws per drive.

•

Snug each screw. Be careful not to over-tighten.

4. Reinstall the drive carrier into the enclosure.

Repeat steps 1 through 3 until all of your disk drives are installed.

Promise Technology

Product Manual

Содержание VES0603












































































































Результаты поиска

Содержание VES0603

Отзывы:

Promise Technology VES0603, Руководство по эксплуатации продукта, Страница: 36 / 108

Результаты поиска

Содержание VES0603

Отзывы: