Quick Start Guide
7
Step 4: Connect the SCSI Cable
Installation of the UltraTrak disk array is very similar to the installation of
a standard SCSI drive. The SCSI connector accepts the standard 68-pin
LVD SCSI connector used on most LVD SCSI devices. Refer to your
system and/or SCSI host adapter manual for additional installation
procedures that may apply to your system or host adapter.
Figure 4. Back of UltraTrak RM4000
Caution
To prevent possible damage to the array or system,
ensure that system power is OFF before connecting the
cables.
Power Connector
Serial (DB-9) Connector
Serial (RJ-45) Connector
SCSI Output Connector
SCSI Input Connector
Power Switch
