ProMinent Ultromat ULPa, Руководство по сборке и эксплуатации, Страница: 50 / 84

10.1.5 Parameters [Level]
Mode Menu Archive Reset
Pressure sensor parameter
System stop
Level Water Powder Liquid Stirrer
Level Max Max:
Level Max:
Level Min:
Level Min Min:
A0829
Start Polymer:
Fig. 28: Parameters [Level]
Parameter Remark
Level Max Max The
[Level Max Max]
is used to monitor for overfilling. If overfilling occurs, an
[Overfill]
alarm is
signalled.
Level Max If the
[Level Max]
is exceeded, Ultromat preparation is stopped.
Start Polymer If the
[Start Polymer]
level is exceeded, polymer metering and the stirrer start.
Level Min If the
[Level Min]
is undershot, Ultromat preparation is started
Level Min Min If the [Level Min Min] is undershot, an alarm message appears and the release for extraction is
cancelled.
Switching level of the continuous flow system:
400 1000 2000 4000
Max-Max 900 1000 1350 1450
Max 850 930 1290 1360
Start Polymer 560 620 860 900
Min 300 320 380 480
Min-Min 140 150 180 200
All values given in millimetres
Operating Menu [F2]
50