24
Declaration of Conformity for Machinery ATEX
We,
n
ProMinent GmbH
n
Im Schuhmachergewann 5 - 11
n
D - 69123 Heidelberg, Germany,
hereby declare that the product specified in the following, complies with
the relevant basic health and safety requirements of the Directive, on the
basis of its functional concept and design and in the version distributed by
us.
Any modification to the product not approved by us will invalidate this dec‐
laration.
Tab. 16: Extract from the Declaration of Conformity
Designation of the product:
Metering pump, Sigma product range
Design for use in areas at risk of explosion in accordance with the ATEX Direc‐
tive (2014/34/EC)
Product type:
S1Ba_ _ _ _ _ _ _ _ _ _ _ _ _ _ § $ _ _
with characteristics
§ = "L" or "P" and $ = "1" or "2"
Serial number:
see nameplate on the device
Relevant directives:
ATEX Directive (2014/34/EC)
Machinery Directive (2006/42/EC)
Compliance with the protection targets of the Low Voltage Directive 2014/35/EU
according to Appendix I, No. 1.5.1 of the Machinery Directive 2006/42/EC
EMC Directive (2014/30/EU)
Harmonised standards applied, in
particular:
EN 13463-1:2009, EN 13463-5:2011
EN ISO 12100:2010, EN 809:1998 + A1:2009 + AC:2010
EN 61000-6-2:2005 + AC:2005, EN 61000-6-4:2007 + A1:2011
Ex-designations:
II 2G IIC T3 X for $ ="1"
II 2G IIC T4 X for $ ="2"
X*: max. media temperature 90 °C
Ambient temperature -10 °C ... +40 °C
Date:
20.04.2016
* “Special conditions” - refer also to the chapter entitled “Special conditions
for ATEX”.
You can download the Declaration of Conformity at www.prominent.com.
The Declarations of Conformity, the EC type-examination certificates and
the operating instructions for the individual components are also enclosed
with the pump.
For pumps with explosion protection:
Declaration of Conformity for Machinery ATEX
88
