Operating instructions ProMinent
®
von Taine
®
0807 PP/PVDF
Page 12
7.3 Disassembly of the pump
1. Remove the 6 screws (901.1) in the pump
housing (101).
2. Take the suction flange (162) off the pump
housing (161). Pull the impeller with the
impeller magnet (230 + 847.1) and the
center shaft (211) out of the magnet
deviding housing (161).
Required tool: fork or ring spanner!
No tools required!
3. Take the thrust ring (314.2) off the
suction flange (162).
4. Take the thrust ring (314.1) off the
magnet deviding housing (161).
Required tool: center shaft (211)!
Required tool: center shaft (211)!
