ProMinent Flow Control 3 Скачать руководство пользователя страница 9

2.3  General Safety Information

 WARNING!

Danger from hazardous substances!
Possible consequence: Fatal or very

serious injuries.

Please ensure when handling hazardous

substances that you have read the latest

safety data sheets provided by the manu‐

facture of the hazardous substance. The

actions required are described in the

safety data sheet. Check the safety data

sheet regularly and replace, if necessary,

as the hazard potential of a substance can

be re-evaluated at any time based on new

findings.

The system operator is responsible for

ensuring that these safety data sheets are

available and that they are kept up to date,

as well as for producing an associated

hazard assessment for the workstations

affected.

 WARNING!

Unauthorised access!
Possible consequence: Fatal or very

serious injuries.

Measure: Ensure that there can be no

unauthorised access to the unit

 WARNING!

Operating faults!
Possible consequence: Fatal or very

serious injuries.

Ensure that the unit is only operated

by adequately qualified and techni‐

cally expert personnel

Please also observe the operating

instructions for any other units, such

as the metering pump etc.

The operator is responsible for

ensuring that personnel are qualified

 WARNING!

When metering aggressive media, take

into consideration the resistance of the

materials used – refer to the ProMinent®

Resistance List in the latest product cata‐

logue or at www.prominent.com.

 NOTICE!

Life phases of the unit
You have a duty to observe the informa‐

tion contained in the operating instructions

at the different phases of the system's

service life

Safety Chapter

 

 

 

9

Содержание Flow Control 3





























Отзывы: