Activslate Quick Start Guide
7
2.
Prepare the Activslate System
Connect the Activhub
Install the software before connecting the Activhub.
Insert the Activhub connector into the USB socket on your Computer. The Function
Indicator LED will light up red to indicate that is has power.
When the driver has been detected, the red Function Indicator LED changes to
flashing green, this indicates that the device has initialised.
Optimising Use of the Activhub
Connect the Activhub to the 2m USB cable, place in the holder and put the holder in
an elevated position, raising the antenna. The path between the Activhub and the
Activslate should be unobstructed for optimum performance.
Function Indicator LED (Red =
Power : Flashing Green =
Initialised)
Activslate Quick Start Guide
7
2.
Prepare the Activslate System
Connect the Activhub
Install the software before connecting the Activhub.
Insert the Activhub connector into the USB socket on your Computer. The Function
Indicator LED will light up red to indicate that is has power.
When the driver has been detected, the red Function Indicator LED changes to
flashing green, this indicates that the device has initialised.
Optimising Use of the Activhub
Connect the Activhub to the 2m USB cable, place in the holder and put the holder in
an elevated position, raising the antenna. The path between the Activhub and the
Activslate should be unobstructed for optimum performance.
Function Indicator LED (Red =
Power : Flashing Green =
Initialised)