58
promesstec GmbH
I Niedersachsenstraße 4 I D- 48465 Schüttorf I Tel.:+49 (0)5923/ 90 229 0 I Fax:+49 (0)5923/ 90 229 29
E-Mail: [email protected] I Internet: www.promesstec.com
Add
: Press “Add” to add events to the Digital Input
Remove
: Press “Remove” to remove events from the Digital Input
Type
: Select Low, L or High, H
Job1, Job2
: To configure Job, select Job1, Press on Enter button. It will show list
of all the jobs, select the required Job.
Note: Number of digital inputs shown at DI screen depends on number of Digital
input cards inserted in the paperless recorder.
Sample applications of Digital input …
After pressing a “Start” switch at site, latch ON Digital Ouput1
After pressing a “Pause” switch at site, latch Off Digital Output1
Start Timer, Stop Timer
Reset Totalizer, Reset Counter
Reset MaxMinAve values of all the channels etc..
It is possible to display Digital input status via status bar on any page in the paper-
less recorder. If digital input is not available,
it shows as “Low”, Presence of digital
input shall be shown as “High”. To configure status bar, refer section “
Display
”
Digital Input status can also monitored from the
(Menu). Press on Status
and then select “DI”, it will show Digital Input Status as follows.
