P20K2E9
9.1
9.
Programming by the User
Enables machine functions and parameters to be switched on or set up.
User programming of the digital K2 can be carried out via
-
operator's control panel OC-TOP
The user programming of the digital K2 is possible by means of an operator's control panel via
-
programming parameters.
The programming of parameters is possible via three levels of program:
-
Programming on level A (operator level)
-
Programming on level B (technician’s level)
-
Programming on level C (special level)
9.1
User Programming with Operator Panel OC-TOP
(see fig. 9.1)
Fig. 9.1
140896
0/0
www.promelectroavtomat.ru
