First Step:
Mount the #BH1 onto your Tripod or Mounting Base with a 3/8-16
Mounting Thread Screw. Begin by spinning the entire Ball Head until the unit
becomes snug. Next, confirm the panning screw (F) is tight and give the unit a
few additional light twists to firmly lock it into place.
Mounting Your Gear:
First, install an Arca Compatible Plate onto your camera
body. Next, make sure the Main Lock Knob (G) is tight and secure. Clockwise
to tighten / Counter-clockwise to loosen. The #BH1 is Arca compatible and
features the ProMediaGear #C60 Clamp. Loosen the Clamp Lock Knob (B).
The jaws are spring loaded and will open enough to drop in or slide in Arca
compatible gear. Once you have your gear in place lock down the Clamp Lock
Knob (B) until snug.
General Movements:
While holding your camera, loosen the large ergonomic
Main Lock Knob (G) to loosen the entire Ball Head mechanism. The Clamp (B) will
be free to spin 360° as well as twist back and fort or fall into the 90° Drop Slot (C).
Lock down securely once your desired position is achieved.
Panning:
Loosen the Pan Lock Knob (F) to rotate your camera 360°
Instructions
A. Arca Compatible #C60 Clamp with Spirit Level
1.
2.
3.
4.
B. Clamp Lock Knob
C. Drop Slot
D. Mounting / Panning Base
E. 3/8-16 Mounting Adapter
F. Pan Lock Knob
G. Main Lock Knob
360° Rotation
90° Rotation
Содержание BH1
Страница 3: ......
