A.
Keep the inner parts of the handpiece as free as possible from
dust and grinding residue.
B.
Remove dirt from the outer surface of the handpiece with a
cloth moistened with alcohol. Prevent moisture from entering
the unit.
C.
Only use grinding heads with a dental standard size of
2.32 - 2.35 mm (0.091 - 0.093 inches) and avoid using
rusted or damaged grinding heads. Their false usage may
lead to excessive wear and tear in the ball bearings. Adhere
to the safe speed and the safety measures stipulated by the
manufacturer.
D.
Do not expose the handpiece to strong knocks as this may
damage the ball bearings. If the handpiece should fall down,
check whether the grinding head is bent. Pay closer attention
to noise and/or heat generation. Send the handpiece
immediately in for repair should it be damaged.
M
aintenance
tiPs
Please pay attention to the following before first time
operation:
Never place the unit in direct contact with fire, gas, oxygen or
hot objects such as hot plates.
Please observe the following during operation:
A.
The handpiece may only be connected to the unit included in
the delivery contents.
B.
Grinding heads to be used:
• Standardized dental size: 2.32 - 2.35 mm / 0.091 - 0.093 inches.
• Only use centered grinding heads with a rounded shaft end.
• The use of rusted or bent grinding heads is not permitted.
C.
Use the speed controller carefully.
D.
Switch the unit off before you change the direction of rotation.
E.
Before you switch the unit on, you must set the rotating speed
(rotary knob (
E)
) to zero.
F.
Appliance power supply: 115 V~ or 230 V~.
DE
US
FR
IT
ES
NL
RU
PL
SE
FI
