June 2016
SAFETY RULES
*
The safety could not be assured if the instructions
for use are not closely followed.
*
This equipment can be used in
Overvoltage Category
III
installations and
Pollution Degree 2
environments
.
*
When using some of the following accessories use only
the
specified
ones to ensure safety:
One pair test leads
*
Review the state of the test ends before its use.
*
Observe all
specified ratings
of measurement.
*
Remember that voltages higher than
60 V DC
or
33 V
AC rms
are dangereus.
*
Use this instrument under the
specified environmental
conditions
.
*
The user is only authorised to:
Battery replacement
Fuses
*
On the Maintenance section proper instructions are given.
*
Any other change on the equipment should be carried out
by qualified personnel.
*
Follow the
cleaning conditions
described in the
Maintenance paragraph.
*
Observe all
specified ratings
for measurement.
