En
g
lis
h
CONTROL MODULE.
DT-802
04-2015
Page 11
If you change connection cables between modulators and receivers, you should
reboot the system so that the CPU will do a new assignment, otherwise you will should
modify assignments manually using the setup menu of the
DT-802
module.
If there is any pair of
DT-101/102
and
DT-301/302
linked, NO place each one in a
different sub-rack controlled by different control modules because it would not work
properly.
Figure 6.-
Application example
DTTV
.
The
DT-802
has an electric current sensor that prevents it from starting up when it
is not connected to any module. Therefore the control module will not be ON if at least
one connection is made previously.
The combiner modules
DT-700
and
DT-710
are supplied with some resistors to
balance the inputs/outputs not used and unbalanced. You should also bear in mind that
the module
DT-802
does not control these two modules. The
DT-700
is also a passive
module combiner that does not need to be powered.
The necessary devices to connect the antenna or signal sources to the headend
(Splitters, cables, connectors, etc.) are not supplied with the
DTTV
. In the same way, if
you want to combine an output
DTTV
signal with other signals already existing, such as
DTT
, the installer will must provide the necessary connectors.
Содержание DT-802
