S.A.R.L. au capital de 15 250 €
SIRET : 408 484 913 00012 APE : 514 S R.C.S. CRETEIL
N° de TVA intra-communautaire : FR 13 408 484 913
7
PRESSURE SETTINGS
G. Adjust the pressure screwing or unscrewing the screw (knurled knob -
4
), pull down the
heat plate with its handle (
3
), screw or unscrew the other knurled knob (
5
) so that it touches
the surface of the support (
6
).
H. When the press reaches the necessary temperature*, place the support to be printed and
the logo on the lower plate and close down the heat plate using the handle. (
3
). Once in the
closed position, the heat plate will be locked due to the electromagnet.
I. The screen (
B
) shows the count down, the buzzer rings 3 seconds before the automatic
opening of the heat plate.
K. The transfer is done.
* See the correspondent guidelines as to transfer conditions (time, temperature, pressure,
weeding…).
