PROMAT 9000360080, Оригинальное руководство пользователя

Страница: 14 / 46

10
Operation

The unit is not designed for continuous use.

Protect the power cord from heat, oil and sharp edges. Protect the steel
cable from sharp edges. Immediately have a damage steel cable replaced.

For using the unit, we recommend the use of an RCD. In Switzerland the
utilisation of an RCD is obligatory.

Modifications on the cable hoist are not allowed.

Do not lift persons with the cable hoist and do not divert the unit from its
intended use.

Treat the product with care. Avoid mechanical shock, impact or dropping it
from any height. The product may be damaged.

Do not disassemble the unit or attempt to modify or repair it yourself. It does
not contain parts serviceable by you.
Operator Obligation
For among others, commercial operation, the operator is obligated to ensure
efficient occupational safety and accident prevention. Applying regulations for
occupational safety, the specified maintenance intervals and regular examinations
must be observed.
Before the first Use
Unpack the cable hoist and check all parts for damage in transit. Dispose of
packaging material or store it out of reach of children. Plastic bags may become a
deadly toy for children.
Install the hoist preferably on a tubular steel boom, as shown
in the figure. Make sure the unit is horizontally mounted.
The tubular steel you use must have a diameter of at least 48
mm and a wall and a thickness of at least 3 mm. Anchor the
boom permanently to a wall. The anchoring must be of
appropriately sturdy design, i.e. must be able to carry the
loads. In doing so, observe the continuous bearing capacity
of all attachments and the max. weights to be absorbed. incl. own weight.