Promaster SF108M, Инструкция по эксплуатации

Страница: 9 / 10

1. Use the built-in flash on your camera or an external flash as a master
flash.
2. Set one or more SF108M flashes in your desired position.
3. Press the test button on your master flash or make a test exposure to
ensure the slaves are seeing the master flash and fire accordingly.
NOTE: Do not put any barrier between the master and slave flash. The
barrier will block the optical signal. In the slave mode the SF108M will go
into the power save mode after 30 minutes of inactivity.
FOR YOUR SAFETY
Before using your product, please read the following safety precautions:
1. Never attempt to disassemble or repair the flash unit by yourself.
2. If the flash unit is dropped and damaged, do not touch any exposed interior
metal parts.
3. If you detect heat, smoke or notice a burning smell, immediately stop
operation and remove the batteries to prevent the unit from catching on fire
or melting.
4. The flash unit should never be submerged in liquid or exposed to rain,
saltwater or moisture unless it is properly protected from the liquids and
moisture. Underwater use requires a certified underwater housing.
5. Do not use the unit in the presence of flammable or explosive gas.
6. Do not fire the flash unit directly at the driver of a moving car, as this could
temporarily impair the driver’s vision and cause an accident.
7. Do not fire the flash unit directly into the eyes of someone that is at close
range, as it could damage their eyes’ retinas. Never fire the flash unit
closer than 1 meter from infants.
8. Do not fire the unit while the flash head is touching a person or object.
9. Keep small accessories out of the reach of children to avoid the possibility
of the accessory being swallowed. If an accessory is accidentally
swallowed, immediately consult with a doctor.