Promaster SF108M, Инструкция по эксплуатации

Страница: 7 / 10

OPERATION
Testing the flash
1. Press the POWER button for
approx. 2 sec. to turn the power on.
2. Press the MODE button to select the
desired mode.
3. Press the +/- button to increase or
decrease the power output.
4. When the charge indicator is green,
press the TEST button to fire the
flash.
5. Mount the flash on the camera hot
shoe. The flash is ready for use.
6. When not in use, press the POWER
button for approx. 2 sec. to turn the
power off.
Note: In the manual mode, the flash
will automatically power off after 60
minutes of inactivity.
Using the built-in bounce card
In bounce flash photography, use the
built-in bounce card to create a highlight
in the subject's eyes, making the eyes
look more vibrant.
As shown in the illustrations, pull out the
wide-flash adapter and while holding the
bounce card, slide the wide-flash
adapter back into place inside the flash
head.
Tilt the flash head up 90° to use this
feature most effectively.