Installing The Batteries
1. With your camera and the Vertical Grip
Operation Switch (3) OFF, turn the
Battery Holder Release Handle (9)
counter-clockwise and pull. This will
allow you to slide the Battery Holder (16)
out of the grip.
2. Install one or two LP-E17 Li-ion battery(s)
into the Battery Pack Compartment (15)
while aligning the contacts carefully.
*Note, you can power the camera using just
one battery. Two will provide twice as much
shooting time.
3. Insert the Battery Holder (16) into the
grip and turn the Battery Holder Release
Handle (9) clockwise to lock it in place.
4. Once the Battery Holder (16) is properly
inserted, turn on your camera. Then
activate the grip by sliding the Vertical
Grip Operation Switch (3) to ON.
