0
:0
0
2
:0
0
4
:0
0
6
:0
0
8
:0
0
1
0
:0
0
14
13
12
11
14.6V
13.3V
3 hours
Fast Charge
Absorption Charge
Float Mode
Elapsed Hours
Average Voltage
V
olts
Charge Mode Indicator and Operation
When the ProTournament Marine Battery Charger is activated the on-board
tri-mode LED indicator will illuminate as follows for each step of charging:
Step 1: Fast Charge – Solid Red Indicator
During this mode the on-board tri-mode indicator will be a solid red indicating
fast charge.
The charger will deliver its maximum amperage rating to the connected batteries
for the fastest charge (current regulation mode) until battery voltage is raised to
14.6 volts (lead acid factory setting). At this time the ProTournament will shift to:
Step 2: Absorption Charge - Flashing Red Indicator or Continued Solid Red for
ProTournament100 and 200
During this mode the on-board tri-mode indicator will be flashing red indicating
absorption charge.
This mode maximizes charge and holds voltage at 14.6 volts (lead acid factory
setting) for 3 hours (voltage regulation mode) while letting the batteries determine
the amount of amps they can accept. This mode creates activity in the batteries
reducing sulfate buildup and conditions batteries for extended life. After
approximately 3 hours has elapsed the ProTournament will shift to:
Step 3: Float Mode - Solid Green Indicator
During this mode the on-board tri-mode indicator will be solid green indicating
float mode.
A precision 13.3 volts (lead acid factory setting) finishing voltage that maintains
each battery (step down voltage regulation mode) which is perfect for short or
long storage periods and will never overcharge your batteries.
6
Note: If the tri-mode LED indicator is not on at all this may be an indication of
a short or a faulty battery on one of the banks.
P r o To u r n a m e n t O v e r v i e w
