Promaker PRO-ES2000, Руководство пользователя

Страница: 12 / 32

12
is facing the right direction according
to the different type of disk/wheel
used. In the case of abrasive disks,
the flange (9) is inserted with the
raised side towards the disk. In
the case of cutting-off wheels, the
flange (9) is inserted with the flat
side towards the wheels.
5. Press and hold the lock button (7)
to lock the spindle and then tighten
the external flange (9) with the
spanner (8).
Abrasive Disks
Ensure that the speed to which the
machine is set is sufficient for the
accessories chosen.
Use only abrasive disks with a
diameter of up to 180mm!
Before mounting the disks remove
the mains plug from the socket.
Note: Expect a “rain of sparks” when
the disk comes into contact with
metal.
While grinding, always maintain
the correct angle between the disc
and working surface of 15-20°. This
procedure ideal avoids overloads.
Switch ON/OFF
Switch ON/OFF
WARNING: To reduce the risk
of injury, wear safety goggles or
glasses with side Shields
Turn on: push the lock-off knob and
depress the main switch trigger.
Turn off: release the main switch
trigger.
Overload
The motor of your right angle
grinding machine may be damaged
when overloaded. This results
from excessive working pressure