Promac 331C, Руководство по эксплуатации

Страница: 4 / 17

3
15. Always keep the machine in good working order. Keep the cutting faces sharp and clean for optimum
performance. Follow the instructions for cleaning, lubricating and replacing accessory equipment/tools .
16. Always disconnect the machine from the mains before carrying out any maintenance work or replacing
machine parts such as saw blade, drill bits, cutting tools etc .
17. Only use the recommended accessories. Follow the instructions in the User Manual. The use of
unsuitable accessories may cause accidents .
18. Prevent any accidental starting. Before connecting the equipment to the mains, always check that the
operating switch is in OFF position (O ).
19. Never stand on the machine. Any tipping over of the machine or contact with the cutting tool can result
in very severe accidents.
20. Check for damaged parts. Damaged guards or parts should be properly repaired or replaced before
further operation .
21. Never leave a running machine unattended. Always switch off the mains supply. Do not leave the
machine unattended until it has come to a complete standstill .
22. Never operate the machine if you are under the influence of alcohol, medication or drugs .
Always wear safety glasses!