http://prolux.net.ua
13
6.15
LIGHTING SETTING PARAMETER RESET
1) Press the
【
ENTER
】
button in
【
ST L
】
menu, then enter to the lighting setting
parameter reset.
2) Press the
【
UP/DOWN
】
button to select
【
YES
】
.
3) Press the
【
ENTER
】
button to escape and save.
Illustrations
：
“ADDR” “CTST” and “PROG” are not reset, the others reset to the
underlined value of the word.
6.16
【
PROG
】
SELF-PROGRAMMING PARAMETER RESET
1) Press the
【
ENTER
】
button in
【
PR L
】
menu, then enter to the
【
PROG
】
self-
programming parameter reset.
2) Press the
【
UP/DOWN
】
button to select
【
YES
】
.
3) Press the
【
ENTER
】
button to escape and save.
6.17
LIGHTING PARAMETER DOWNLOADING EACH OTHER VIA DMX
CABLE
1) Press the
【
ENTER
】
button in
【
SEND
】
menu, then enter to sending
parameter to other lightings.
2) Press the
【
UP/DOWN
】
button to select
【
YES
】
.
3) Press the
【
ENTER
】
button to confirm sending.
Illustrations
：
1)Please disconnect the connection of projector and DMX console before sending
the parameter.
2)The information of
【
ADDR
】、【
CAL
】
can’t be sent, can’t be downloaded
each other.
3)There will be an automatic reset of the other projectors after receiving parameter
correctly.
7 INSTRUCTION FOR COMPATIBLE SWEDEN DMX WIRELESS MODULE
1)
There are 4 modes: compatible Sweden receive mode (green indicator),
compatible Sweden transmit mode(blue indicator), normal mode(yellow
indicator),custom mode(red indicator)
2)
After
【
RESET
】，
and then press
【
KEY
】
to switch above modes, select
needed mode and press
【
KEY
】
one second to confirm and save it.
3)
Under compatible Sweden DMX receive mode, press
【
KEY
】
3 seconds to
delete matching between light and transmitter.
4)
Under compatible Sweden DMX transmit mode, press
【
KEY
】
to match
receive mode, press 3 seconds will delete matched mode.
