Prolux AllVac, Руководство пользователя

Страница: 16 / 33

16
NOTE – Cleaning Carpet. Use of the Prolux AllVac with waxing/polishing/scrubbing nozzle for
carpet cleaning is not intended for prolonged use. It can only be used for small jobs and spot cleaning.
To do so one pad and fine polishing seat must be totally removed and the Floor Polishing/Lint pad
must be added to the one remaining. In this manner it may be used for spot cleaning carpet and rugs.
If the unit powers off during use that means the motor has over worked and turned off to protect itself
and carpet cleaning must be stopped immediately or the warranty will become void.
Connecting the “Fine Polishing Seat” and the “Rough Polishing Nylon Brush” to the Unit.
Hold the above mentioned discs and make them align with the special section hole of the gear of the
waxing head. After being lined up, as shown in the image below press the discs until you hear a
clicking sound. If you need to remove the discs you just need to pry discs off in backwards order that
you put them on.