15
English
Troubleshooting guide
The main unit does not
display temperature and
humidity readings from
the outdoor sensor/s.
• Check the batteries and replace if necessary.
• Hold in [ CHANNEL ] to scan for a signal from
the sensor/s.
• Make sure that the distance between the sensor and
the main unit is not too far.
• Make sure that the signal is not blocked by furniture.
• Press [ RESET ] to reset the main unit.
The main unit does not
register any rainfall when
it rains.
• Check the batteries and replace if necessary.
• Press [ CHANNEL ] to scan for a signal from
the sensor/s.
• Make sure that the distance between the sensor and
the main unit is not too far.
• Make sure that the signal is not blocked by furniture.
• Press [ RESET ] to reset the main unit.
• Make sure the rain catcher is level.
• Check the rain gauge by pouring in some water.
You should be able to hear the sensor unit moving
from side to side.
• Dismantle the rain gauge and clean it thoroughly.
Refer to the
Getting started – Checks and installation
– Dismantling the rain gauge for cleaning
section
above.
The main unit is not
registering any wind
speed readings.
• Check the batteries and replace if necessary.
• Press [ CHANNEL ] to scan for a signal from
the sensor/s.
• Make sure that the distance between the sensor and
the main unit is not too far.
• Make sure that the signal is not blocked by furniture.
• Press [ RESET ] to reset the main unit.
• Make sure that the anemometer is mounted correctly.
• Try to generate a reading by rotating the anemometer
by hand. Try moving the anemometer to a better location.
Disposal
This product should be disposed of in accordance with local regulations.
If you are unsure how to proceed, contact your local authority.
