5
E
n
g
li
sh
Getting started
1. Unscrew the screw that secures the battery cover and open the cover.
2. Install one CR2032 battery (3 V) in the battery holder. Pay attention to the polarity.
The positive side of the battery must be facing upwards.
NOTE!
If the power fails:
• The alarm is not activated when the clock is powered from the battery.
• The purpose of the battery is to supply the projector clock during power fai-
lures and to maintain the set date and time. When the power is restored, the
clock is once more powered from the wall socket.
• When the projector clock is powered from the battery, the display and
the radio are both disabled.
3. Connect the projector clock to a wall socket.
Use
Time and date
1. Press and hold [MODE] for two seconds. The year starts to flash on the display.
2. Press or hold [
◄◄
] or [
►►
] to set the year.
3. Press [MODE] repeatedly to set the following in turn: Month – Day – 12/24-hour
display – Hours – Minutes. Press repeatedly or hold down [
◄◄
] or
[►►
] to do
the various settings.
Projector
1. Switch the projector on or off with [PROJECTION ON/OFF].
2. Turn [FOCUS] for a sharp projected image of the set time on the ceiling or wall.
3. To rotate the projected time through 180º, press [180º FLIP].
4. The maximum distance to the wall/ceiling is 3 metres.
Radio
1. Switch the radio on and off with [ON/OFF].
2. Choose
FM
or
AM
with [BAND]. An AM aerial is built into the radio.
3. Tune in the radio station you want with [TUNING].
4. Set the volume you want with [/-].
Alarm 1 and 2
1. Press and hold [AL.SET] for two seconds. The setting for hours for alarm 1 flashes
and the indication for alarm 1 lights up on the display
2. Press or hold [
◄◄
] or [
►►
] to set the hours.
3. Press [AL. SET] again to set the minutes.
4. Press [AL. SET] again to set the weekday interval. Press [
◄◄
] or [
►►
] to choose
from the following intervals: 1–5 (Monday to Friday), 1–7 (the entire week),
6–7 (Saturday-Sunday), 1–1 (one day of the week).
