9
Chapter 4
Installation
If it makes sense to plug the appliance into an outlet that is near, but not behind the appliance, a
rectangular, plastic wire-concealment conduit should be used (PN 10619).
Step 2 – Mounting Kit, Parts and Tools
The
mounting kit provided with AQ570
includes a mounting plate, which holds the appliance to the
wall, and 4 screws and wall anchors suitable for plastered drywall — 2 short flat-head screws and 2
longer round-head screws. If you have another surface you will need to get anchors suitable for the
wall material and screws that work with these anchors. The screws need to be the same length as the
ones provided — 2 long round-head screws and 2 short flat-head screws. You will need the following tools:
1. A good level to help you make the mounting plate
exactly horizontal.
2. A hammer.
3. A Phillips screwdriver to match the screws provided
or whatever screwdriver matches the screws needed
to attach to the anchors you have chosen.
4. A pointy tool like a small screwdriver to insert through
the holes on the appliance to mark the right spot for
the anchors.
5. A Drill.
Step 3 – Position the Mounting Bracket
Place the mounting bracket directly over the power outlet (if hardwired or plugged elsewhere,
position the mounting bracket to the side of the power source). Use the level to make sure
the mounting bracket is horizontal. While holding the bracket level, use a pointy tool, screw or
screwdriver to mark the location of the top two wall anchors. Check again with the level to ensure the
bracket is horizontal.
4
