Prolitec Air/Q 565, Руководство пользователя

Страница: 23 / 34

Starting Up
• Now the “1” icon is turned on to indicate you are setting program 1. The Rate
digits blink to prompt you to set the rate. You may set to any value between 1
and 50, or set to 0 to disable the program. Press the Set button to advance.
• If you set the rate to 0, then the current and subsequent programs are all
disabled. For example, if the rate for program 2 is 0, then program 2 and 3 are
disabled.
• If you set a non-zero rate, then the rate digit changes to “S” to indicate start
time. The hour digit should blink to prompt you to set the start hour. Use the
+/- buttons to set the hour. Then press the Set button to advance and set the
minute. Press the Set button to advance.
• The rate digit now changes to “E” to indicate you are setting the end time. Use
the +/- buttons to set the end time. Press the Set button to advance to the
next program.
• Program icon 2 should now turn on. Use the +/- and Set buttons to set the
start and end times for program 2 and then for program 3. Note that if you
need only 1 or 2 programs for the day, you simply disable the subsequent
programs by setting their rates to 0.
• After setting the programs, turn the dial to Run Program.
Hint : To set same programs for Monday to Friday, you may set the programs
for everyday first and then disable Saturday and Sunday.
You may review the programs by doing the same as in programming. Just
beware not to accidentally set the everyday programs as this will also set and
change the programs of all the days.
21