Beta Draft Confidential
10
Proliphix Internet Managed Thermostat (IMT) 350c/350w Installation Guide, Release 1.0
Part No. 600-03000-350, Rev. 1
Installing and Wiring the Thermostat
Table 3
lists the remote sensor switch settings.
Connecting CAT5/CAT5E/CAT6 Wiring for Ethernet Networks to
IMT350c Thermostats
The label located on the inside of the base plate (see
Figure 4
) shows several
color-coded wiring schemes for Ethernet CAT5/CAT5E/CAT6 connections.
To wire the Ethernet network, refer to
Figure 4
and match the label number to the
Proliphix base plate number for CAT5/CAT5E/CAT6 color coding.
Note
Only one sensor can be connected to each port.
Table 3 Remote Sensor Switch Settings
Remote Sensor
Thermistor and Contact
Remote Sensor 1
A1
ON
B1
OFF
Remote Sensor 2
A2
ON
B2
OFF
Note
If the other end of the CAT5/CAT5E/CAT6 cable is connected to a Proliphix
EPA-20/60 Ethernet Power Adapter, follow the wiring scheme for T568A.
Caution
All wiring must conform to local codes and ordinances. The distance between
CAT5/CAT5E/CAT6 cables and HVAC cables should be a minimum of one inch.
