LINE-IN GRABBING
Using this USB pre-amplifier to grab Line in signal from audio
device such as CD.
Connection
a)
Connect audio cable
(R L
3.5mm: option)
to your CD player and
USB preamplifier as
the illustration below.
b)
Take the USB cable
(USB A
mini 5
cable : option).
Connect your PC or
notebook, with USB
preamplifier as the illustration below.
IF YOUR AUDIO DEVICE ONLY SUPPORT 3.5mm
STEREO OUTPUT, PLEASE FOLLOW THE FOLLOWING
a)
Find a 3.5mm
3.5 mm cable (not included), connect one end to
“Line In/Pre-Amp Out” port on the USB preamplifier and the
other to the 3.5mm output of your audio device.
b)
Set the slide position on the USB preamplifier to “Line In”
Operation
A.
Power on & play your audio device
B.
You can now start operating audio grabbing program on your PC
or notebook
7
