PHONO preamplifier (Stand alone or operated with
PC at the same time)
a)
Connect audio cable R,L
R,L (optional) to turntable player and
USB Pre-Amp.
b)
In order to prevent the “HUM” caused by mismatching of the
turntable and USB preamplifier. We recommend user to wire the
ground for these 2 devices.
c)
Get the USB
mini USB cable (optional), and then connect with
your PC and the USB Pre-Amp. Please make sure this connection
is well done because the USB preamplifier is powered via USB
port.
d)
Connect 3.5mm
Audio R, L cable (optional), and then connect
the “Line In/Pre-Amp Out” port and the Audio RL end to your
stereo amplifier.
e)
Set the slide on the USB preamplifier to “Pre-Amp Out” position
5
