background image

 

 

1.9.  Advanced Network

In some special situation, your network environment only provides PPPoE connection (ADSL service); there is 

no NAT/router available. You will then need to set the PPPoE settings in the “Advanced Network” page. Only the 

PPPoE username and password are needed to let PPPoE work. After the “Save & Apply” button is pressed, the 

PPPoE function will work immediately. You can check the “Registration status” in the “Information” page to see 

if the IP Camera is registered using the PPPoE connection.

Please take note that the DHCP or static IP settings in the “Network” page can work together with the PPPoE 

connection. Only that the PPPoE has higher priority, so, if the PPPoE is working, the IP Camera will use PPPoE to 

connect to the Internet.

The default setting is “Disable PPPoE”.

Figure 3-10: Advanced network settings page

1.10.

 

Video Settings

The IP Camera is designed to provide high quality video for viewing from LiveView Software. In this page, 

you can modify some settings related to the video viewing:

       1. Password (play video) – this is the password needed for viewing the video from IP Camera 

       Together with the IP Camera ID, you can view the video of this IP Camera anywhere in the world through 

       the Internet.
       2. Internet speed – this is the Internet bandwidth of your network environment. Higher value will 

       generate higher video quality. But if your internet connection cannot provide more bandwidth than the       

       specified value, the video quality could degrade. Set this

 

value lower than your internet bandwidth.

       3. Select resolution & frame rate automatically – you can let the system select the suitable video 

       resolution and frame rate automatically for you. The selection is based on the “Internet speed” value. 

       This is the recommended default setting.
       4. Resolution – 320x240/640x480/1024x768/1280x800. If you decide to choose the value manually, you  

       can choose one of the values. However, If the Internet speed is slow (low value), setting high resolution 

(1280x800) or frame rate could cause very bad video quality.

EN 16

Содержание PIC1007WP












































Отзывы: