PROLiNK Hurricane 9300G Скачать руководство пользователя

Страница: 5 / 112

Hurricane 9300G (802.11g) ADSL2+ Modem Router

Chapter 1: Introduction

Introduction to your Router

Welcome to the (802.11g) ADSL2+ Modem Router. The router is an “all-in-one” unit, combining an

ADSL modem, ADSL router with four-port 10/100M auto-crossover Switch, and Firewall, enabling you to

maximize the potential of your existing resources. The router can provide everything you need to get the

machines on your network connected to the Internet over your ADSL broadband connection. It supports

the latest ADSL2/2+ technology enabling high-speed data rates of up to 24Mbps. Its powerful QoS

feature for traffic priority and bandwidth management. 802.11g ADSL2+ router with integrated 54Mbps

802.11g Access Point in this device; the router brings up the productivity and mobility to office users.

With features such as an ADSL Quick-Start wizard and DHCP Server, you can be online in no time at all

and with a minimum of fuss and configuration, catering for first-time users to the guru requiring

advanced features and control over their Internet connection and network.

Features

The (802.11g) ADSL2+ Modem Router combines high-speed Internet access, networking, and

advanced security for office local area network. It provides:

xpress Internet Access

The router complies with ADSL worldwide standards.

It supports downstream rate up to 12/24

Mbps with ADSL2/2+, 8Mbps with ADSL.

Users enjoy not only high-speed ADSL services but also

broadband multimedia applications such as interactive gaming, video streaming and real-time

audio much easier and faster than ever.

It is compliant with Multi-Mode standard (ANSI T1.413,

Issue 2; G.dmt (ITU G.992.1); G.lite (ITU G.992.2); G.hs (ITU G994.1); G.dmt.bis (ITU G.992.3);

G.dmt.bisplus (ITU G.992.5)).

Wireless Ethernet 802.11g (Wireless router only)

With integrated 802.11g Wireless Access Point in the router, the device offers a quick and easy

access among wired network, wireless network and broadband connection (ADSL) with single

device simplicity, and as a result, mobility to the users. In addition to 54 Mbps 802.11g data rate, it

also interoperates backward with existing 802.11b equipment. The Wireless Protected Access

(WPA) and Wireless Encryption Protocol (WEP) supported features enhance the security level of

data protection and access control via Wireless LAN.

Fast Ethernet Switch

A 4-port 10/100Mbps fast Ethernet switch is built in with automatic switching between MDI and

MDI-X for 10Base-T and 100Base-TX ports. An Ethernet straight or crossover cable can be used

directly for auto detection.

Multi-Protocol to Establish A Connection

Supports PPPoA (RFC 2364 - PPP over ATM Adaptation Layer 5), RFC 1483 encapsulation over

ATM (bridged or routed), PPP over Ethernet (RFC 2516) and IPoA (RFC1577) to establish a

connection with the ISP. The product also supports VC-based and LLC-based multiplexing.

Quick Installation Wizard

Supports a WEB GUI page to install this device quickly. With this wizard, end users can enter the

information easily which they get from their ISP, then surf the Internet immediately.

Содержание Hurricane 9300G

















































































































Результаты поиска

Содержание Hurricane 9300G

Отзывы:

Похожие инструкции для Hurricane 9300G

Бренды по названию

Популярные бренды

PROLiNK Hurricane 9300G, Руководство пользователя

Результаты поиска

Содержание Hurricane 9300G

Отзывы:

Похожие инструкции для Hurricane 9300G

Бренды по названию

Популярные бренды