Proline UFZ180, Инструкция по эксплуатации, Страница: 8 / 13

door open, to eliminate any unpleasant odors.
Cleaning your freezer
Remove the mains plug from the wall socket, open the door and remove all the food to a
cool place. Use a solution of lukewarm water and a teaspoon of bicarbonate of soda with a
soft cloth to clean the internal cavity and dry well. Remember to clean the condenser
located at the rear of the appliance, use a dry brush or a vacuum cleaner to remove dust
from the condenser.
After cleaning re-insert the mains plug.
We recommend that you polish the metal parts of the product (i.e. door exterior,
cabinet and sides), with a silicone wax (car polish) to protect the high quality paint
finish. Check door seals regularly to ensure they are clean and free from food
particles.
Reversing the door
1.) Unplug the product from the mains supply.
2.) Tilt the product backwards and lean it against a wall.
3.) Remove the four bolts fixing the bottom hinge and remove the hinge plate.
4.) Lift the bottom of the door and slide downward to remove the door.
5.) Remove the hinge pin insert from the door.
6.) Remove the blanking cap from the opposite side and insert it in the original hole.
7.) Insert the hinge pin insert in the remaining hole.
8.) Remove the two screws holding the hinge pin to the top of the door cavity and
transpose to the opposite recess.
9.) Transfer the door hinge and door-stop screws to the other side of the bottom hinge
plate.
10.) Re-fit the door to the top hinge pin and align with the door cavity.
11.) Remove the self-tapping screw from the new position of the bottom door hinge plate
and re fit to other side (see NOTE).
12.) Re-assemble the bottom door hinge in the reverse order of removal.
13.) Check the door is aligned and that the seals are in contact with the door cavity all
around the door.
NOTE:
Use the self tapping screw to clear the bottom hinge plate holes if required. Re-fit to
opposite side for storage.