This appliance is designed for
domestic use only, specifically for the
storage of edible foodstuffs.
This appliance is designed to operate in
ambient temperatures (surrounding air
temperature) between 16 and 32
If these temperatures are exceeded i.e.,
colder or warmer, the appliance will not
operate correctly. Should the ambient
temperatures be exceeded for long periods,
the temperature in the freezer section will rise
above -18 and foo d spoilage may occur.
Before Use
R
. emove all securing tapes and foam under
t.he condenser at the back of the cabinet.
Wash the inside of the appliance with lukewarm
water with a little bicarbonate of soda added (5ml
to 0.5 litre of water). Do not use soap or
detergent as the smell may linger. Dry the
appliance thoroughly.
To Start the Appliance
1. Allow the appliance to stand for 2 hours
after installation.
2. Plug in the appliance and switch on at the
mains supply.
3. Turn the thermostat control to the required
setting. A midway setting is usually suitable
for normal operation (see thermostat control).
4. Leave the appliance for approximately 4
hours for the correct temperature to be
reached before placing food inside.
Thermostat Control
The thermostat control situated in the control
panel regulates the temperature of the freezer
compartment.
Position MIN - Cold
Position NORMAL- Colder.Normally setting
Room temperature
How often the door is opened
How much food is stored
Position of the appliance
In determining the correct temperature control
setting, all these factors have to be considered
USING THE APPLIANCE
Do not use detergents, abrasive
powders, highly perfumed cleaning
products, wax polishes or products
containing alcohol.
Position MAX - Coldest
The temperature will be affected by:
Position SUPER -To fast freeze much hot food,
and some experimentation may be necessary
Do not allow children to tamper with the
controls or play with the product.
at this position.
NORMAL
MAX
SUPER
MIN
5
