Proline PBI 47 FULL, Инструкция по эксплуатации

Страница: 55 / 97

2 1
NOTE :
1. The washing time may vary depending on the incoming water temperature and the
ambient temperature.
2. The power consumption in left-on mode is 0.49W (door open), in off-mode it is 0.45W.
Starting the Dishwasher
1. Turn the water tap on.
2. Open the dishwasher door.
3. Check the filters.

Ensure they are clean and properly positioned. See “Cleaning and maintenance”
section.
4. Check that there is rinse aid and salt.
5. Load the dishes.

Ensure that the spray arms can rotate freely.
6. Add the required amount of detergent into the dispenser according to the “Washing
Programmes” chart.
7. Press to switch on the dishwasher.
8.

The corresponding programme indicator light will illuminate on the display.
Select the desired washing programme by pressing the corresponding programme
button.
Delay timer: The delay timer allows you to delay the start of a washing programme by 3
hours, 6 hours or 9 hours.
Repeatedly press until the desired start delay indicator light illuminates.
Once the delay timer has been set, close the dishwasher door to activate the function.
The corresponding start delay time indicator light will flash.
Downloaded from www.vandenborre.be