EN-7
CD repeat mode
While the CD is playing, repeatedly press
REP
to select the desired repeat mode.
Repeat icon on the display
Description
“REP” flashes
“REP” stops flashing
“INTRO”
“RAN”
No repeat icon
To repeat a single track
To repeat all tracks
To play the first 10 seconds of each track
Random playback
Normal playback
Programmed play
By programming the player you can play up to 20 tracks in any desired order.
1. While the CD is in stop mode, press
MEM/PROG
.
•
“PROG” and “P-01” will flash on the display.
2. Repeatedly press
/
to select the desired track number.
3. Press
MEM/PROG
again to store the track.
4. Repeat the above steps until you have completed your programme.
5. Press
/CH+
to commence play of selected tracks.
Erasing a programme
Press
/CH-
until “PROG” disappears on the display.
AUX IN
Connect an audio cable (not supplied) to the AUX IN jack on the rear of the unit. Connect the
other end to a suitable output socket on your auxiliary device.
In power on state, repeatedly press
S/MODE
to switch the unit to the AUX mode.
You can play music from an auxiliary device through the speakers of the player.
STEREO PHONE JACK
A stereo phone jack is provided on the rear of the player so that you can listen without
disturbing others. To use this jack, plug in the headphones/earphones (not supplied) and adjust
the volume to a preferred level.
Note:
When headphones/earphones are connected, the speakers of the player will be muted.
Downloaded from www.vandenborre.be