3
4
Replacing the battery
1.Remove the battery cover to remove
the used battery.
2.Place the battery into the battery
holder with the + face up.
• If the battery is placed incorrectly,
the product will not work.
3.Attach the battery cover.
You can select the measurement unit between the Metric (g, ml) or Imperial
(lb:oz, fl’oz) system.
Press the MODE button to select the desired working mode and then press
the UNIT button to covert between the two systems.
Weight mode
Milk volume mode
Water volume mode
Tare weight
Zero weight
Negative value
Mode
Weight unit (kg)
Volume unit (ml)
Volume unit (fl’oz)
Weight unit (lb:oz)
PRODUCT DESCRIPTION
Display
SETTING THE MEASUREMENT UNITS
Working modes:
Weighing
area
Battery cover
MODE
button
UNIT
button
Display
ZERO
button
EN
EN
• Avoid breaking the scale by striking the glass with
a sharp object or by dropping. Store your scale
horizontally; do not store it in its side. The battery
should only be replaced by adults. Do not allow
children to use the appliance unless the battery
cover is attached.
• Failure to properly align the battery polarity
correctly can cause damage to the product and
can cause a fire hazard.
The battery type used in this product is one 3V
CR2032 lithium battery. This battery is located
internally and readily accessible. Remove the
battery cover to remove the battery. The battery
must be disposed of at your local recycling point.
