USER MANUAL CAPTURE DMX512
Location
Don't install the device at places with mechanical shakings and vibrations, high dustiness
or high
temperature. Not keeping these conditions can lead to shorter lifetime or its damage.
DON´ T expose the device to influence of water, rain or moisture. It could lead to electric
shock or fire.
Ventilation
It is necessary to ensure fans against their covering and secure the devices to have
admission of air.
Supply voltage
Don´t use any other supply voltage meant in technical specification and manufacture
label. Not keeping proper supply voltage could lead to damaging the device, starting a fire
or its wrong function.
Power cord
Check if power cord is not mechanical damaged and if it is connected properly. Check
also if the socket is designed sufficiently for needed loading. Otherwise there is a danger
of electric shock or a fire. Power cord must not be bent excessively, led through sharp
edges or given to mechanical stress. Don´t pull the supply lead out by the flex but only by
the plug. The device must always be connected behind the main switch. Do not touch the
supply lead with vet hands, you are threatened by electric shock.
Other important cautions
Don´t poke any objects into cooling fans and ventilator, it could lead to serious electric
shock or damaging the device. Be careful of no water or other liquid entering.
Maintenance and cleaning
Don´t use any solvent and similar chemicals which could damage surface finish or some
parts of device. Use soft and smooth cloth for cleaning optical parts of device and its
surface. Never use washing powders or other cleaning agents with grinding effect.
Connect the device to power supply after complete drying.
Service
Never try to repair, dismantle or do some construction changes in case of any failure.
Always consult qualified employee or dealer. Not keeping this rule you can suffer
dangerous electric shock. Disconnect the device from mains before replacing the lamp or
dismantling the housing. Not keeping this procedure you can suffer dangerous electric
shock.
Unplug mains lead before opening the housing and cleaning internal parts of device./
optical system, dichroic filters, etc/ You can suffer electric shock.
Unpacking
Unpack the device and after acclimatisation take off the protective foil. Make sure that
there are no damages caused by transportation.
Installation
The device can be installed in any position without alerting its operation. For mounting
use bracket of device, which is a mounting hole in. First make sure that the structure you
are going to attach the projector is secure.
Содержание CAPTURE DMX512
Страница 1: ...Capture DMX512 USER manual ...
