ProLights Sunrise 2IP, Руководство пользователя

Страница: 16 / 28

Category Parameter PID GET SET
Supported
Parameters
Curve 0x0343 x x
Curve Description 0x0344 x
Device Hours 0x0400 x x
Device Info 0x0060 x
Device Label 0x0082 x x
Device Model Description 0x0080 x
Device Power Cycles 0x0405 x x
Dimmer Information 0x0340 x
Discovery Mute 0x0002 x
Discovery Unique Branch 0x0001 x x
Discovery Un-Mute 0x0003 x x
Display Invert 0x0500 x x
DMX Personality 0x00E0 x x
DMX Personality Description 0x00E1 x
DMX Start Address 0x00F0 x x
Factory Defaults 0x0090 x x
Identify Device 0x1000 x x
Identify Mode 0x1040 x x
Lamp Hours 0x0401 x x
Lamp Mode 0x0404 x x
Lamp State 0x0403 x x
Lamp Strikes 0x0402 x x
Manufacturer Label 0x0081 x
Modulation Frequency 0x0347 x
Modulation Frequency Description 0x0348 x x
Output Response Time 0x0345 x x
Output Response Time Description 0x0346 x
Parameter Description 0x0051 x x
Product Detail ID List 0x0070 x
Sensor Definition 0x0200 x
Sensor Value 0x0201 x
Software Version Label 0x00C0 x
Supported Parameters 0x0050 x
PROLIGHTS - Sunrise
2IP 14
10 - RDM FUNCTIONS
The product can communicate using RDM (Remote Device Management) protocol over a DMX512
Networks.
RDM is a bi-directional communications protocol for use in DMX512 control systems, it is the open
standard for DMX512 device configuration and status monitoring.
The RDM protocol allows data packets to be inserted into a DMX512 data stream without affecting
existing non-RDM equipment. It allows a console or dedicated RDM controller to send commands to
and receive messages from specific fixtures.
The PIDs in the following tables are supported in the product.