13
SOLAR
3.10 STATIC CONFIGURATION
For custom colors of device, is possible refer two modes of color management:
Fixture Color
•
Press the button MODE so many times until show [
C
] and press the button ENTER to confirm.
•
Select the program (
R - G - B - W - GB - RB - RG - RGB - RW - GW - BW - RGW - RBW - GBW - RGBW
) through the but-
ton UP/DOWN.
•
Press the button ENTER to confirm
Manual Color
•
Press the button MENU so many times until show [
U
] and press the button ENTER to confirm.
•
Select the color red, green or blue (
Red - Green - Blue
) through the button UP/DOWN ad press the but-
ton ENTER.
•
Set the value (
000-255
), through the button UP/DOWN.
3.11 SPECIAL FUNCTIONS
•
Press the button menu and select through the directional buttons is possible to view to following func-
tions:
DIMMER
Enter [
DIM
] to select dimmer mode and dimmer speed. When dimmer is set to [
OFF
], the RGB and
MASTER DIMMER are linear. The Dim1/2/3 are speed modes of the non linear dimmer, [
DIM1
] is the
faster, while [
DIM3
] is the slowest.
Note. The factory default setting is [
DIM3
].
TEMPERATURE
In
[TEMP]
you can view on the display the temperature of the device.
TEMPERATURE
Enter the [
KEY]
mode to select whether the access password is on or off.
•
Press the button MODE so many times until show
[KEY]
and press the button ENTER to confirm.
•
Select
[ON]
or
[OFF]
.
When the fixture is set as pass
[ON]
, after 30 seconds or turn on the fixture next time, the fixture will need
an access password to enter the display menu control.
NOTE - The factory access password is UP + DOWN + UP + DOWN. Press ENTER to confirm the access.
Содержание Solar
Страница 1: ...I EN Manuale Utente User Manual SOLAR WASH LIGHT ...
Страница 17: ......
Страница 35: ......
