ProLights SMARTTUBE32, Руководство пользователя

Страница: 30 / 40

SMARTTUbE32
10
3.8 SOUND MODE
To set the sound mode refer to the following steps:
• Press the MENU button so many times until the display shows Snd.
• Press the ENTER button for save the setting.
3.9 MICROPHONE SENSITIVITY
To set the microphone sensitivity refer to the following steps:
• Press the button MENU so many times until shows Sens .
• Using UP/DOWN button, select one of the programs u1 - u100 (low to high).
• Press the button ENTER save the setting.
3.10 MANUAL COLOR
This mode allows to combine the colors red, green and blue (r, g, b) .
• Press the button MENU so many times until the display shows
U--
, then press the button ENTER.
• Select the color (r, g, b) through the buttons UP/DOWN.
• Press the button ENTER to confirm.
• Using UP/DOWN button, select the desired color value 000 - 255 .
• Press ENTER button to continue to the next color.
• Continue until the desired mix is obtained.
• Press the MENU button to go back or to meet the waiting time to exit the setup menu.
3.11 OPERATION THROUGH THE IRC CONTROLLER
To start up the IR recevitor refer to the following steps:
• Press the MENU button so many times until the display shows SET .
• Press the ENTER button to confirm.
• Press the UP/DOWN button, select one of the programs ON or OFF .
• Press the ENTER button for save the setting.
NOTE - Make sure to point the controller directly at the receiver on the product.
Automatic Mode
Automatic Mode will enable you to run the automatic programs on the
product.
To turn on Automatic Mode:
1. Press AUTO on the controller.
2. Press + or – to choose between the different auto programs.
To adjust the speed of the automatic program:
3. Press SPEED on the controller.
4. Press %.
5. Press + or – to either increase or decrease the speed of the program.
Sound Active Mode
Sound Active Mode will enable the product to respond to the music.
To turn on Sound Active mode:
1. Press SOUND on the controller.
To adjust sound sensitivity in Sound Active mode:
1. Press SENSITIVITY on the controller.
2. Press %.
3. Press + or – to either increase or decrease sound sensitivity.
Fig.4
IRC REMOTE
BLACK
OUT
AUTO
STROBE SPEED
SOUND
SENSI-
TIVITY
%
MANUAL
FADE
R G B
+ 0
1 2
3
4 5 6
7 8 9
A
UV W