manualshive.com logo in svg

ProLights RA3000Profile, Руководство пользователя

Поделиться
Скачать
ProLights RA3000Profile Скачать руководство пользователя страница 15

13

RA3000PROFILE

3.8 WIRELESS SETTINGS

• To enter the wireless setting mode press the ENTER button until the display shows 

Connect

, then select 

Wireless

, then press the ENTER button.

• Select the 

Wireless Receive

 function using the UP/DOWN buttons, then press the ENTER button.

• To activate the 

Wireless 

reception mode, use the UP/DOWN buttons and select the On option.

• Press the ENTER button to confirm the selection.

• Press the LEFT button to go back or wait a few seconds to exit the setup menu.

• NOTE - Once you have performed these steps, you must synchronize with any WiFi unit with which you 

want to communicate by pressing the sync button on it. At this point connect the DMX console to the WiFi 

unit to open the communication with the RA3000PROFILE.

• To reset the unit, select the 

Wireless Reset

 function using the UP/DOWN buttons, press the ENTER button 

until the display shows 

Connect

, then select 

Wireless

, then press the ENTER button.

• Select the 

Wireless Reset

 function using the UP/DOWN buttons, then press the ENTER button.

• To activate the mode use the UP / DOWN keys and select the Yes option.

• Press the ENTER button to confirm the selection.

• Press the LEFT button to go back or wait a few seconds to exit the setup menu.

To activate the 

Wireless  to DMX

  function, use the UP / DOWN buttons to press the ENTER button until the 

display shows 

Connect

, then select 

Wireless

, then press the ENTER button.

• Select the 

Wireless  to DMX 

function using the UP/DOWN buttons, then press the ENTER button.

• To activate the mode use the UP/DOWN buttons and select the Yes option.

• Press the ENTER button to confirm the selection.

• Press the LEFT button to go back or wait a few seconds to exit the setup menu.

3.9 ETHERNET

For the ArtNet settings to be assigned to the unit, refer to the following menu section.

• Press the UP/DOWN button to scroll through the menu, select 

Connect

, then press the ENTER button ac-

cess the next 

Ethernet

 menu with the UP / DOWN button, then press the ENTER button.

• Use the UP/DOWN buttons to select one of the following settings: 

Universe, Start Channel, IP Address, Ethernet 

to DMX

.

• Press the ENTER button to confirm the selection and enter the sub menu.

• Set the desired value for the selected function using the UP/DOWN buttons. Then press

Fig.5 - Example of a DMX 38-channel configuration

DMX Address: 185

DMX Address: 109

DMX Address: 71

DMX Address: 147

. . . . . . . . . . . . 

DMX512 Controller

Содержание RA3000Profile

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды