ProLights RA2000PROFILE, Руководство пользователя

Страница: 14 / 60

RA2000PROFILE
12
3.4 LINKING
Several units may be interconnected in order to control all further slave units to the same effect of the
master unit.
1. Connect the DMX OUT of the master unit via 3/5-pole XLR cable to the DMX IN of the first slave unit.
2. Connect the DMX OUT of the first slave unit to the DMX IN of the second slave unit, etc. until all units
are connected in a chain.
3.5 DMX ADDRESSING CONFIGURATION
To enter the DMX mode, follow these steps:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select
Connect
, then press the ENTER button to enter the
next menu.
• Press the UP/DOWN button to scroll through the menu, select the Address and press the ENTER key.
• Press the arrow keys to select the desired value ( 001-512 ).
• Press the ENTER key to confirm the setting.
• Press the LEFT button repeatedly to exit the menu and save changes.
3.6 DMX MODE CONFIGURATION
RA2000PROFILE has 5 DMX channel configurations that can be accessed from the control panel.
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll through the menu, select
Connect , then press the ENTER button to
enter the next DMX Mode menu.
• Press the ENTER button and select DMX Mode with the UP/ DOWN button, then confirm the selection with
the ENTER button.
• Use the UP/DOWN button to select the desired DMX channel configuration (
Standard 38Ch, Standard 40Ch,
Extended 39Ch, Extended 41Ch, Extended 44Ch ), then press the ENTER button to confirm your choice.
• Press the LEFT button repeatedly to exit the menu and to save the changes made.
The tables on page 19, 20, 21, 22, 23, 24 indicate the operating modes and related DMX values. As a DMX
interface, the unit has 5-pin XLR contacts.
3.7 DMX ADDRESSING
For operation via a light control unit with DMX512 protocol, simply connect RA2000PROFILE to the con-
troller. The projector has a DMX channel configuration that can be accessed from the control panel. In
order to control RA2000PROFILE with a light control unit, the DMX start address must be set for the first
DMX channel.
If, for example, address 33 is provided on the control unit to control the function of the first one DMX
channel, the start address 33 must be set on the RA2000PROFILE. The other panel functions will be auto-
matically assigned to the following addresses.