17
PIXIESPOT
3.12 FIXTURE SETTINGS
You can change the parameters for the device by following these steps:
• Press the button LEFT to enter the menu mode.
• Use the buttons UP/DOWN to select the System setup item. Press the button ENTER to confirm.
• Press the buttons UP/DOWN to select the desired option item and press the button ENTER to confirm:
-
Master/Slave
- This configuration allows to connect many units PIXIESPOT. The first will be set as
Master
and the others will work as
Slave
with the same effect. Press the buttons UP/DOWN to set the units as
master or slave. Press the button ENTER to confirm. Use PIXIESPOT DMX connectors and XLR cable
to do a units chain.
-
Sound Sence
- Microphone sensibility for the control through musical command in autoshow modal-
ity. After selecting
Sound Sence
function press the button ENTER to confirm. Use the buttons UP/
DOWN to select the desired value (
000-100
). Then press the button ENTER.
NOTE - In music mode, via its integrated microphone, the unit can be controlled by music with a
clear rhythm in the bass range. If the music control should not work optimally, increase the volume
or reduce the distance between the sound source and the light effect unit or alternatively increase
the sensitivity of the microphone.
-
White Balance
- White Balance function. Select the
White Balance
function to set the white balance by
changing the values (125-255) of the colors
Red, Green and Blue
.
-
Dimmer Mode
- Adjusting the dimmer. Enter in
Dimmer Mode
to select specific dimming curve.
Particularly when set:
•
Off:
The increase in light intensity is linear
•
Dimmer 1:
Light intensity control is finger at low levels and coarse at high levels.
•
Dimmer 2:
Light intensity control is finger at high levels and coarse at low levels.
•
Dimmer 3:
Light intensity control is finger at low levels and high levels and coarse at medium levels.
-
Fan Mode
- Fan speed. Select the desired fan speed
High Speed
or
Auto Speed
through the button UP/
DOWN.
-
Factory Settings
-
Factory reset. Select
Factory Settings
function and then
Yes
to restore all values to the
original factory settings.
• Press repeatedly the button LEFT to return the menu mode.
3.13 DISPLAY SETTINGS
• Press the button LEFT to enter the menu mode.
• Press the buttons UP/DOWN to select the
Display setup
item. Then press the button ENTER.
• Press the buttons UP/DOWN to select the desired option item and press the button ENTER to confirm:
-
Display Inverse
- Used for reversing display. Select
Display Inverse
, press ENTER button to confirm, present
mode will blink on the display, use UP/DOWN button to select
No
(normal display) or
Yes
(inverse dis-
play), press ENTER button to store.
-
Back Light
- Display backlight. Select
Back Light
, press ENTER button to confirm. Use the UP/DOWN keys
to select
On
for display always on or
Off
for setting display off one minute after the exit from the menu.
-
Warn Cue
- Select
Warn Cue
, press ENTER button to confirm, present mode will blink on the display, use
UP/DOWN button to select
No
(Normal) or
Yes
(display will show the error warning when the unit
went wrong).
• Press repeatedly the button LEFT to return the menu mode.
3.14 FIXTURE TEST
Auto Test
Allow checking the proper functioning of the unit. Start the automatic test in the following way:
Содержание PIXIESPOT
Страница 1: ...USER MANUAL PIXIESPOT SPOT MOVING HEAD EN ...
Страница 23: ...Note ...
Страница 24: ......
