ProLights MOSAICOXL, Руководство пользователя

Страница: 19 / 72

17
MOSAICOXL
3.6 WIRELESS
• To enter the Wireless mode proceed in the following mode:
• Press the MENU button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select
Connect , then press the ENTER button to enter the
next menu.
• Select the Wireless Receive function using the UP/DOWN buttons, then press the ENTER button.
• To activate the Wireless Receive function, use the UP/DOWN buttons and select the On option.
• Press the ENTER button to confirm the selection.
• Press the MENU button to go back or wait a few seconds to exit the setup menu.
NOTE - Once you have performed these steps, you must synchronize with any WiFi unit with which you
want to communicate by pressing the sync button on it. At this point connect the DMX console to the
WiFi unit to open the communication with the MOSAICOXL.
• To reset the unit, select the
Receive Reset function using the UP/DOWN buttons, press the RIGHT button
until the display shows Connect , then select Receive Reset using the UP/DOWN buttons, then press the
ENTER button.
• To activate the mode use the UP / DOWN keys and select the Yes option.
• Press the ENTER button to confirm the selection.
• Press the MENU button to go back or wait a few seconds to exit the setup menu.
• To activate the
Wireless to DMX function, use the UP / DOWN buttons to press the ENTER button until the
display shows Connect , then select Wireless to DMX , then press the RIGHT button.
• To activate the mode use the UP/DOWN buttons and select the Yes option.
• Press the ENTER button to confirm the selection.
• Press the MENU button to go back or wait a few seconds to exit the setup menu.
3.7 SCREEN
It is possible to modify the following parameters, related to the display, following the same procedure:
• Press the MENU button to access the main menu.
• Press the UP/DOWN button to scroll through the menu, select
Set Up , then press the ENTER button ac-
cess the next menu.
• Press the UP/DOWN button to select Screen and press the ENTER button to proceed.
• Select the proposed option with the UP/DOWN button and press the ENTER button to confirm.
DMX512 Controller
. . . . . . . . . . . .
Fig.5 - Example 28 DMX channels configuration
DMX Address: 33 DMX Address: 117 DMX Address: 61 DMX Address: 89