11
MINIECLIPSEWD - MINIECLIPSETRWD
3.3 MENU STRUCTURE
MENU (LEVEL 1)
(LEVEL 2)
(LEVEL 3)
REMARK
1
Auto Show
Auto Show Speed
< Auto 1 >
< 100 > Default: Auto 1; Speed:100
< Auto 2 >
< 100 >
< Auto 3 >
< 100 >
< Auto 4 >
< 100 >
2
Static
Dimmer
255 Default: 255
Strobe
0 Default: 0
3
Dimmer Mode
< Off >
Off: Dimmer speed On/Off
<Dimmer1>
DIM 1: Dimmer speed fast 0.8 s
<Dimmer2>
DIM 2: Dimmer speed middle 1.6 s
<Dimmer3>
DIM 3: Dimmer speed slow 2.4 s
4
Back Light
< On >
Default: On
< 10 s >
10 s: Off after 10 seconds
< 20 s >
20 s: Off after 20 seconds
< 30 s >
30 s: Off after 30 seconds
5
Information
Fixture Hours
< 9999H>
Version
< V1.0 >
6
DMX Address
< 001 >
Default 001
7
DMX Channel
< 1 Ch >
Default 5CH
< 2 Ch >
< 5 Ch >
8
Master/Slave
Master
Default: Slave
Slave
9
Wireless Setting
Receive Setting
< On > Default: Off
< Off>
Receive Reset
< No >
< Yes >
3.4 AUTO SHOW MODE
If no DMX control signal is present at the DMX INPUT, the unit independently runs through its show pro-
gramme provided that the blackout mode is switched off:
• Press the button MENU so many times until the display shows
AUTO
, then press the button ENTER.
• Press the button UP/DOWN to switch between the show
AUTO 1 - AUTO 4
. The unit will operate in show
mode.
• Using the button UP/DOWN to select the desired run speed slow-fast
(0-100)
• Press the button ENTER to save the setting.
IMPORTANT: Programs
AUTO 1 - AUTO 4
are fully pre-programmed and will not be altered by changes.
NOTE - To deactivate AUTOSHOW mode, activate SLAVE function.
Содержание MINICLIPSEL
Страница 35: ......
