ProLights LEDFLOWERKIT4, Руководство пользователя

Страница: 21 / 28

7
LEDFLOWERKIT4
2.4 OPERATION IN AUTOMATIC MODE
If no DMX control signal is present at the DMX input, the unit independently runs through its programme
provided that the blackout mode is switched off:
• Press the button [MODE] until appears on the display [AUTO]
• Press the button [SETUP] to select programs [n001 - n042] with the buttons UP and DOWN.
• Press the button
[SETUP]
to select the speed of execution
[SP00 - SP99 - SPFL]
with the buttons UP and
DOWN.
• Press the button [SETUP] to select the flash frequency [FS00 - FS99] with the buttons UP and DOWN.
2.5 PROGRAMS
To select the preset programs:
• Press the button [MODE] until appears on the display [Pr01]
• Press the buttons UP and DOWN to select the programs
[Pr01 - Pr42]
• Press the button [SETUP] to select the speed of execution [SP00 - SP99 - SPFL] with the buttons UP and DOWN.
• Press the button [SETUP] to select the flash frequency [FS00 - FS99] with the buttons UP and DOWN.
2.6 SOUND MODE
• To enter in sound mode; Press the button [MODE] until appears on the display [SOUN].
• Press the button [SETUP] to select the different value [SO01 - SO31] with the buttons UP and DOWN.
2.7 STATIC CONFIGURATION
To set the custom balance of red, green, blue, white and amber:
• Press the button [MODE] until appears on the display [CLXX].
• Press the buttons UP and DOWN to select the 5 different settings: [CL.r - CL.g - CL.b - CL.y - CL.u].
2.8 MASTER/SLAVE MODE
This mode will allow you to link up the units together without controller. Choose a unit to function as the
Master. The unit must be the first unit in line; other units will work as slave with the same effect.
• Press the button [MODE] until appears on the display [SLAV].
• Select the desired program (see section 2.4).
• Use standar DMX cable to daisy chain your units together via DMX connector on the rear of the units.
For the longer cable runs we suggest a terminator at the last fixture (see page 10).
2.9 DMX MODE
• Press the button [MODE] until appears on the display [d001].
• Press the buttons UP and DOWN to select the value desidered [d001 - d512]
• Press the button [SETUP] to select the different mode DMX [dp01 - dp02] with the buttons UP and DOWN.
The tables on page 9 indicate the operating mode and DMX value.
2.10 DMX ADDRESSING
To able to operate the LEDFLOWERKIT4 with a light controller, adjust the DMX start address for the first a
DMX channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX
channel, adjust the start address 33 on the LEDFLOWERKIT4. The other functions of the light effect panel
are the automatically assigned to the following address. An example with the start address 33 is shown
below