7
HERO H100B
Once the screws are removed, the lid of the housing can be carefully swung upwards, as shown above.
Take care not to spill any of the bubble fluid inside the unit.
The fluid tank is designed to fit only one way around. Make sure you insert it correctly, as shown above,
with the lower edge facing into the machine.
3.3 OPERATION
For manual operation, set the power switch to “Manual Mode” on the back of the machine. The internal
bubble drum and fan are activated and the machine produces bubbles. For wireless operation with the
Wireless control, set the power switch to “Wireless Mode”. Now please refer to chapter “Wireless Remote”
for setting the remote control.
3.4 WIRELESS REMOTE CONTROL
The wireless remote control system consists of a transmitter equipped with two buttons for bubbles on
and off, and a receiver pre-attached to the rear panel of each HERO-series model.
Transmitter
With the transmitter it is possible to emit bubbles via radio over a distance of up to 50 meters. The trans-
mitter is compatible to any receiver of the HERO-series and can control an unlimited number of machines
in parallel.
Fig.3
Fig.4
