ProLights H150UFC, Руководство пользователя

Страница: 30 / 44

H150UFC
10
11 Wireless Setting
ð
Button C:M01
...
Button C:M10
Button C:C01
...
Button C:C15
Button C:OFF
12 Wireless Setting
ð
Button D:M01
...
Button D:M10
Button D:C01
...
Button D:C15
Button D:OFF
13 LED Setting
ð
Fog only
Always On
14 LED Fade out
ð
Delay: 0 Sec
...
Delay: 5 Sec
15 Run Last Setting
ð
ON
OFF
2.8 DMX MODE
To enter in DMX mode, the following steps:
• Press the MENU button until the display shows the voice DMX 512 .
• Press the UP/DOWN button to select the DMX address and the desired value between 1 and 504 (hold
to quick scroll).
Press the STOP button to exit the setup menu.
2.9 DMX ADDRESSING
The H150UFC has 1 DMX configuration with 8 channels. The table on page 13 indicates the mode of opera-
tion and its DMX values . As a DMX interface, the unit has contacts XLR 3-pin and 5-pin.
For to control the H150UFC with a light control unit, set the DMX start address with the first free DMX
channel. If, for example, on the control unit is provided for the address 33 for controlling the function of
the first DMX channel, you must set on the H150UFC the start address 33. The other functions of the panel
will be automatically assigned to successive addresses. Follows an example with the start address 33: